Solar street light controller only one button and digital display, would like to ask experts to learn how to design his time, the power is mainly want to know the specific mode of operation, please help explain the master
Debug mode (6 ·): used for system debugging, when the optical signal is closed load, no light signal load, easy installation and commissioning check the correct installation of the system. Normally open mode (7 ·): The power load remains in the output state, which is suitable for 24 hours power supply.
Manual mode (5 ·): In this mode, the user can press the button to control the load on and off, regardless of whether it is during the day or night. This mode is used for some special loads or when used for commissioning.
Light control + time control (1 ~ 4 ·): start the same process and pure light control, when the load to the set time to automatically turn off, set the time 1 to 14 hours.
Pure light control (0): When there is no sunlight, the light intensity drops to the starting point, the controller delay 10 minutes to confirm the start signal, according to the set parameters to open the load, the load began to work; when there is sunlight, light intensity to start Point, the controller delay 10 minutes to confirm the closure of the signal after the closure of the output, the load stops working.
Press the button for more than 3s digital tube began to flash, the system into the adjustment mode, release the button, each press a button, digital tube digital will change a number until the digital display of the number of users from the table selected mode corresponding The number of so far, such as digital tube to stop flashing or press the button more than 3s to complete the set.
