How to install explosion-proof axial fan?
The fan base must be naturally engaged with the foundation plane, and shall not be beaten to the base for forced connection to prevent the base from being deformed. The installation shall be calibrated to the base, with the horn, which will remain in the horizontal position and then tighten the anchor bolts.
At the end of the fan must be installed winders, and hope to install protective net.
The weight of the connecting duct should not be supported by the fan of the fan, and the support frame should be installed.
Installation should pay attention to check whether the connection part of the loose, the blade and the air duct should be uniform, not allowed to touch.
Before installation, check the fan for damage and deformation, if damaged, to be repaired before being installed.
