How to maintain the air compressor ah? For example: how often does the oil change?
Two stage maintenanceClean the valve once every 800H, clear the valve seat, valve cover carbon, clean the lubricating oil filter and filter screen, do a check on the moving mechanism.Cleaning the filter once every 1200h. In dusty places, the filter needs to be cleaned to reduce cylinder wear.Each 2000h will filter oil once, remove metal scraps and dust impurities. If the oil is not clean, the oil should be changed, and the Bush should be adjusted once. Conduct a thorough examination of the clearance of the whole machine.
The main content of the first level maintenance:Every day or every class should refuel each point of the compressor. Special requirements, such as motor bearings lubrication, according to the instructions of refueling. In short, all sports friction parts, including accessories, including regular refueling.Use the machine according to the operation rules, diligence inspection, diligence investigation, handle the trouble in time and record the running diary.When working, keep the machine and floor clean. Before the shift will be the equipment clean.When the room temperature is below 5~C in winter, the cooling water in the cavity should be released after parking.
maintenance at three levelsThree maintenance purpose is to improve equipment repair interval of the intact rate, the content of the work and repairs are basically the same.If the equipment is maintained for a long time, if the unit is not used for a long time, the sealing and maintenance of the unit should be well done.1) before the unit is sealed up, the required amount of grease is added as required. More than 6 months idle period, should be refilled with grease. The grease must be re - added before driving.2) before the unit is put into operation, remove the grease from the oil seal, clean it with kerosene or gasoline, and then add the new oil.
How to maintain the air compressor?Primary maintenanceFirst level maintenance is a daily work. Usually before class, after class and on duty. The purpose is to ensure the normal operation of equipment and civilized and orderly work site.
