How to make an open white paint with edge banding lines?
Surface treatment: 1, the surface must be clean, dry (water content less than 20%), no frost; 2, with the warm cotton fiber grain wipe inverse surface of wood, wood hairs, and dry harden; 3, with more than 180# fine sandpaper polished wood along the grain surface to smooth carefully remove the dust;
Open surface paint is a popular technology in the European high-end furniture in recent years, its performance is: Mukong obvious, texture clear, paint coating amount, matte, natural texture, strong stereoscopic touch. The open surface paint effect process is difficult, the use of modern machinery can not fully reflect the effect, therefore singways using Roughstuff technology. The bottom cleaning process does not use modern mechanical spraying, but uses manual cleaning to color and paint the furniture. The process can ensure the paste firmly attached to the veneer surface, by temperature changes to wood and cold and can make synchronous expansion, two grains of bright colors, texture prominent, natural, and paste, paint directly into the eyes of wood, not easy to fade, not choose color. If you have more questions, click ID.
1, EXMIX wood wax can be used to open cans, please use fully mixing, such as cotton cloth rubbing, without dilution; 2, in the wood surface clean and dry, with a soft cloth dipped in white wood wax evenly along the texture direction, a very thin layer. Such as the use of brush construction, can also be diluted detergent diluted wood wax after brushing, brush after standing for a few minutes to fully penetrate into the wood, wood wax, and then wipe the surface excess wax with a clean soft cloth; 3, as of two coated products, second to be carried out in the hard coating, coating only between two to slight polishing (transparent color wax, the floor with oil / hard wax, wax two Les Loges Du Park Hotel, brushing). If you need a high gloss surface, can use clean dry cloth to dry the surface after EXMIX polishing pad (fine steel wool, 000 mesh) or 100 clean cloth polishing; 4, such as a nail in the eye to fill in a wood, painted after the EXMIX wood putty color patch, and then coated with two. Drying time: it can be dried for about 12 hours at room temperature 20 degrees centigrade and well ventilated. The drying time is about 6 hours, and the actual drying time will be changed due to the temperature and humidity. Tool cleaning: use EXMIX dilution cleaner or turpentine substitute.
