How to paint the wood floor
1, the carpet will be removed on the floor. Cut the carpet and roll it into pieces so that it can be thrown into the trash can. Once all the rugs have been removed, you can start the real work on the wood floor. 2, will be any protruding nail head smashed into it. There may be some nails on the floor of the wood, to keep the floor from creaking, or to fasten a loose board. In any case, the wooden floor surface exposed nails are dangerous and annoying. Most of the time, it would be better and easier to pull the nails into the floor than the nails. Will nail into the wood floor about half a centimeter. With a nail sets, so that when the nails will not be left on the wooden floor smashed marks. To drop in the direction of the nail, do not look against. Once the nail is half a centimeter deep, after grinding the rest of the wood floor, you can use a little filler to cover the nail head. And then use a little more. 3, to ensure that the floor is relatively clean. If the back of the old carpet sticks to the wood floor, you need to scrap it with a putty knife. It would be a fairly monotonous job and spend a lot of time, but it was worth it If necessary, you can clean the wood floor again with a vacuum cleaner and a mop. Years of dust and gravel will produce a lot of waste. You have to deal with the old wooden floor surface paint before the removal of these dregs. 4, remove any wood floor edge of the stripping. If you peel off the old carpet in the process of stripping off the old carpet, before the grinding of these off the first pieces of wood removed, so as to light up these areas.
You can use Bili beads can also use the white ah as long as you like ah ah can ah
Floor paint directly to the floor, brush with a brush brush evenly, do not be too much on the line, the floor with a floor oil in January once.
Wood floor paint is the paint on the floor, and then wipe with a brush. You can use Biluo beads of the floor care essential oils for maintenance, a quarter is enough
