How to remove plastic film that is attached to stainless steel door for a long time?
I suggest you use rubber water to try, such as a water wash with water as raw material is rubber, rubber cloth dipped in water directly to clean the door should be rubbed down, you can start with a small area of the test, but when I use a water wash wipe tape file cabinet on the residual feeling it is good for, if the area is large enough, it is recommended to use a rubber washing water concentration is not enough.
1: use the hair dryer to protect the film. Use the hot air blower to blow the glue. After it has melted, tear it off gently. In addition, the remaining glue, continue to use blowing, and then use plastic film will remain glued down.Two: plastic film used to isolate the stainless steel door and air contact, better protection of appearance.
The blade of the wallpaper blade can be gradually scraped against the surface of the door so that the mucous membrane on the surface can be removed. Pay attention to the window only about 20 degrees, and can not be vertical scraping with the facade. Watch your fingers.
