Home > categories > Construction & Real Estate > Handle & Pull > How to remove the glass door handle
Question:

How to remove the glass door handle

How to remove the glass door handle

Answer:

Open the door, can see a dome cover, remove the cover, see a hole, use the appropriate six flower tools can be loose. Pull the door handle, loose the six-bolt (bolt can only be released, can not be completely out), and finally, the lock part can be removed, and then the door handle can also be removed. The order of installation is reversed. Note: fix it will be broken!
First of all we will be in the installation process will use auxiliary tools such as our commonly used screwdriver class, then we must pay attention to is not because of their own strength is too large or too small lead to auxiliary tools broke the glass door, This is what we do not want to see. Followed by the glass door handle a lot of types, most of the glass doors will leave the slot for the installation staff to install the handle, we need to choose the appropriate size of the handle to install. Finally, most of the door handles are also removable, we first disassemble and then handle the handle from the slot through the auxiliary tool to fix it can be a very good installation of the door handle. For the glass door there are many or different from the ordinary door, in order not to affect the normal installation time at the time of purchase or should be clear to buy the glass door handle, when installed as far as possible to light their own movements, Try not to use too many sharp aids to prevent damage due to mistakes. In short, the installation of the glass door handle is not particularly difficult but still need to carefully and carefully to complete, so as to ensure the quality of the installation of glass doors.
Hello, glass to the door of the handle are indoor and outdoor a handle, the door handle out, most of the screws are loose, so you look at the screw is still above the hole in the handle, if in the words with a screwdriver Can be. On the contrary, if not in the case, I suggest you sell glass accessories where to go to a good screw! The screw is still above the handle, in the side of the drop of the handle you see a screw, you use the cross screwdriver twist down, and then have a section, you will be another screw and glass door above the hole did not handle the connection twist Tighten, and then twist down the screw before you can solve the problem!

Share to: