May I ask if the WiFi repeater can relay the signal directly?. Instead of losing passwords, relay the WiFi directly
Two routers are cascadedSetup of master router B:1. landing wireless router B settings management interface, in the wireless settings - basic settings, set the "SSID", "channel", as shown in figure:2. set up wireless signal encryption information in "Wireless Settings" - "wireless security settings"3. record the SSID, channel, and encryption settings information after the wireless router's B settings
In this case, you can change the original network name and password. Synchronization is not required.If set to the same, you can achieve the effect of "roaming" like a mobile phone.
Relay wireless router A settings:1. modify the LAN port IP address. In the network parameter -LAN port setting, modify the IP address and the B router is different (to prevent IP address conflict), such as 192.168.1.2, save, the router will automatically restart.2. enable WDS functionality. After the restart, with the modified LAN port IP address re landing wireless router A, in the wireless settings - basic settings tick "open WDS"". Note that the SSID here is different from the B router and, of course, can be set to the same, enabling roaming of the signal";3. WDS settings. Click "scan" to search the surrounding wireless signal.4. in the list of signals to be scanned, select the B router SSID number, as shown in figure TP-LINK_841_B, and click "connect"".5. set the channel to the same channel as the B router.6. set up encrypted information and the same B router, "save."".7. turn off the DHCP server. In the DHCP server, select "do not enable", "save", restart the router.Wireless router A configuration complete. At this point, the wireless router A and wireless router B have successfully established WDS.
