Numerical control lathe tool holder is a tool to change what is the fault
Change the tool to change the length of the first, if it is not for the arrival, but look at the system input signal. Step by step the first look at the investigation!
It should have been broken. It's the white plastic ring. Seems to forget what
See what aspects of the problem, is the electrical problem, or mechanical problems, electrical problems, is the location of the magnetic switch to run, or the signal line is short. The mechanical problem is not in place, the first point of lubrication to see if it is caused by dry. If it is not, it is necessary to open the knife
It should be blocked to form the motor overload, the method is verified about CNC lathe turret and motor out, if not the normal disc worm that is stuck to the machine, can be disassembled in accordance with the instructions of disassembly tool, check the internal parts to see if there is deformation coupling and so on because, in many cases is mechanical clamping due to collision deformation.CNC lathe: CNC lathe, also known as the CNC lathe, that is, computer numerical control lathe, is China's largest use, the most extensive coverage of a CNC machine tools, accounting for about 25% of the total number of CNC machine tools. A set of mechanical, electrical, hydraulic, pneumatic, microelectronics and information technology as one of the integrated mechanical and electrical products. Has the advantages of high precision, high efficiency, high automation and high flexibility for manufacturing equipment in machine tools.
What are you holding? The parameter settings of the tool holder and the rotary disc holder are different. Set the wrong will change the knife alarm.
