Stir the paint with good or hammer drill
An electric rotary hammer drill with a safety clutch with a pneumatic hammer mechanism. Hammer principle is the driving mechanism to make rotation movement while the driven drill, hammer and reciprocating in a direction perpendicular to the rotor hammer motion. The hammer is driven by the transmission mechanism of reciprocating piston in a cylinder of compressed air, the air pressure change cycle reciprocating hammer drives the cylinder top blow brick in the cylinder, as if with a hammer percussion hammer named brick.
Drilling machine using electric power as power. Is the power tools in the conventional products, but also the largest demand for power tools products. The working principle of electric motor rotor electromagnetic rotary or reciprocating electromagnetic small capacity motor to do work cutting magnetic field operation, operation device driven by the transmission mechanism drives the gear increase bit power, so the drill bit scraping the surface of the object, through the object better
The ordinary electric drill and electric hammer can stir the paint work, if it is a temporary use, both can, if used for a long time, suggest to buy a special mixing drill, drill or hammer because the average speed is too high, not suitable for long-term mixing paint, and paint professional mixing drill, low speed, large torque, suitable for this work.
1, the size is not the same. The volume ratio of a large hammer drill, electric hammer because inside cylinder, connecting rod, piston and other important parts. The electric drill can only drill, drill, wood, iron sheet, plastic and other materials.2, the weight is not the same. There is only an electric drill motor (stator and rotor +) gear bite and some revolutions, hammer is not the same, should be called the "hammer" so it has impact force, can drill concrete, stone hard material.3, the opening is different. Hammer is the use of compressed gas piston, impact drill bit, need not make much effort, can open 6--100mm in concrete, brick, stone and other hard materials on the hole in the hammer on the opening of materials of high efficiency, but it is not a hole in the metal. The electric drill is not shock, and it needs manpower to press the hole on the metal, wood and other materials. The diameter is 6-50mm.. The advantage of the utility model is that the vibration is small, the opening precision is high, and the price is not high.4, the drill bit is not the same. The hammer is inlaid with alloy drill, drill bit is ordinary.5, the destruction of different intensity. Hammer and hammer can open holes in concrete structures, with all two piston motor function.Hammer for large diameter above 30MM. High efficiency, large aperture and long drilling depth. But it has a great shock and has a certain degree of damage to the surrounding structures. The steel bars in concrete structures can not be passed smoothly. They can not be too close to the building because of the scope of work.Impact drill is suitable for 25MM or so, small bore and short drilling depth. Such as installation of expansion bolts. The damage to surrounding structures is very small.
