The bars on the door of the refrigerator freezer are loose, causing the door to be closed. I wonder if there is a good way
2. hot water immersion method. The door of the refrigerator can be unloaded, and the adhesive strip at the 4 corners of the door seal can be cut with a knife, and a magnetic stripe is drawn out. Remove the door seal, as long as the deformation of the door seal to 60 degrees Celsius in the hot water immersion, from time to time to flip, 7-8 minutes after the fish out, put on the surface of the table, gently straighten hands. After cooling, the curved door seal will be flat and straight. As the door seal at the inconsistent thickness, should be thicker and more forcefully pull several parts. Flat door seals, by reason of stretch, the length has been increased to the refrigerator door installation should cut off the excess, and to the end of a 45 degree angle. When the magnetic stripe is placed into the door seal, the big suction one faces the box and is glued with 502 glue. The 4 angle blade available after the heat is inserted in the corner joints, taking the blade etc. the door seal seams after melting, pinch later re release, door seals on the cement.
Refrigerator magnetic door seals, such as sealing is not good, will directly affect the refrigerator leakage, resulting in poor cooling effect and increase power consumption, but also easy to cause the compressor repeatedly started and burned. So, how do you repair and maintain it?1. hair dryer setting method. In the bad seal, take the electric hair dryer with hot air blowing, the blowing time should not be too long, plastic door seal soft, you can stop in the hair for about two minutes, the door seal deformation elimination, leakage that is repaired. Such as the refrigerator door seal is S shape bending, medial available a ruler pad on the seal, and then use hair dryer to bend slightly heated, to slightly bend the soft plastic when heating is stopped, the refrigerator door seals after cooling, and then taking the ruler, can make the seal of restitution. It must be noted that the use of hair dryer heating, the general use of about 700 watts of hair dryer, control in a minute, the outlet from the seal 3 cm is appropriate.
You use the hair dryer blowing hot air refrigerator if layering, layering invagination, then open the refrigerator door blowing by hand to pull strip to the satisfaction, while the hot air layering is not stopped; if the drum out, then shut the refrigerator door with a hair dryer blowing up layering part can be.
