what to use, there is no suitable cylinder, the company's gas supply is not enough, my device does not have much pressure.The pressure of the air pressure is enough, but the air source is insufficient, and the suitable cylinder can not be selected, so the hydraulic station is used to control the cylinder, but there is no such device, and the friend who knows it tells the thanks!
Oh, my friend, in the hydraulic control system of the cylinder is certainly not good, because the sealing ring of the cylinder is not resistant to oil, and the pressure of the hydraulic system are generally larger, the cylinder wear large, recommended to buy several sets of cylinders can be customized, installation size according to your request, if need can contact I
General cylinder inlet and outlet smaller, through hydraulic oil I'm afraid not normal work, but some are not regular manufacturers cylinder, mouth open larger, vertex without buffer, may be used
At the same speed, under the same thrust conditions, the hydraulic system is much more expensive than the pneumatic system. You can use the hydraulic station to control the cylinder. You might as well buy an air compressor alone.If you have a hydraulic station or a large central hydraulic source, you must use the hydraulic system, you can reduce the work pressure, down to 0.8 MPa, and then send the hydraulic oil to the cylinder, you can also work.
