Home > categories > Furniture & Décor > Wardrobe > Wardrobe material good or bad to distinguish?
Question:

Wardrobe material good or bad to distinguish?

Wardrobe material good or bad to distinguish?

Answer:

First, look at the wardrobe selection. Professional manufacturers are selected in line with national standards for environmental protection plate, and some manufacturers choose some non - test reports, the potential threat to human health of poor quality plate. So, buy wardrobe, first of all, should look at the business, there is no national authority to detect the Department of sheet metal inspection reports and related inspection certificates.
Oct 25, 2017
Panel veneer. Some of the wardrobe, the surface is also good, however, use a nail gently draw, can draw clear scratches. These wardrobe is chosen on the market cheap wardrobe, often used in the surface of Polyflor paper, gorgeous paper board, poor wear resistance. Professional manufacturers are usually used to dip thick paint and high temperature and high pressure treatment of environmental melamine panels, high surface strength, abrasion resistance, scratch resistance.
Oct 25, 2017
See plate edge banding. The professional manufacturer of precision panel saw cutting plate, plate around the broken side. Four edges are sealed to prevent moisture from invading the inside of the board. Some manufacturers do not have professional equipment, cutting rough, surrounded by obvious edge collapse phenomenon. Some even Jerry built, only the front side of the plate edge. No sealing surface, easy to absorb moisture in the air, causing expansion of the plate, resulting in wardrobe deformation, affecting the service life.
Oct 25, 2017
Look at processing methods. Professional manufacturers use professional automatic edge sealing machine, the use of environmentally friendly hot-melt adhesive, four sides of the edge, solid veneer. The use of accessories in the production process is environmentally friendly, in order to ensure the final production of the wardrobe environmental protection, to ensure that there is no public nuisance. Some manufacturers, professional processing equipment, with the ordinary artificial adhesive glue edge, easy to play the drum. In addition, this gum contains benzene, formaldehyde and other harmful substances seriously exceeded standard, pose a potential threat to human health.
Oct 25, 2017
See backboard structure. Professional manufacturers use thickness of 5mm or thicker backplane, melamine veneer, using slot type anti leather lap structure, to prevent the back of the direct contact with the wall surface, absorb moisture on the wall. Some brands, backplane thickness, the pin type backplane connection, direct contact with the back wall, water moisture on the wall plate is easy to be absorbed, easy to damp, moldy, deformation, the cabinet lost seal.
Oct 25, 2017

Share to: