My house is very old. It was built in 1900. The wall ''slats' are so old and dry that the kitchen light won't even stay up. It came off once and the electrician came and put it back up. He said to be careful not to pull the chan to hard or it may come off again. We supplement with wood as it takes 100 gal of oil per year.4 bedrooms only 1 of decent size. All others are very small. Mine is 8ft by 9ft as best I can measure.It has knob and tube wiring in the walls. A few years back we added insualtion. (We didn't realize what we were doing) but the electrician said to make sure the smoke detector was working and we should be ok.Most of my appliances (toaster, coffee pot,ect) I have to be careful which electrical outlet I use, or it will blow a fuse. Some things will work in one outlet better than others. It seems to get tired of working so I have to keep moving things around. My roof leaks. I just had it patched a month ago too, and now it leaks in a differnt spot.
YES YES! You can also buy a sheet of 3/4 inch foam board and glue inside the cabinet , just make sure you have enough roomDo sides..back and top. You can also go by a appliance store and see if they have a junk dishwasher and remove the foil factory blanket on that machine and attach it to yours as well. Good luck on your science project. Most of the noise is coming from the lower front portion of the Dish washersee if you have any ideas to muffle that area.
Can't find it on the internet, but a peed bump would probably be a urinal.
You can go to a junk yard and find a door to fit your model explorer but just replacing the individual parts would be just as easy. You can also get these parts from a junk yard as well which will save you money in the long run. If you are unsure how to replace them than I would suggest going to your local auto parts store and telling them the problem that you are having and they can help you get the right parts for the job. I recommend O'Reillys because most locations will come outside and show you how to replace the parts.
