What is the maximum rotational speed of a single row full cylindrical roller bearing?
FAG full cylindrical roller bearings are especially suitable for ultra high load and medium speed applications. Sealed single row and double row bearings are mainly used in transmission mechanisms, while sealed double row bearings are more suitable for lifting mechanisms. Single row full roller cylindrical roller bearings, in addition to the NJ23VH series, can not be separated. The two rings of the separable bearing can be tightly matched so that it is easy to install and disassemble.
FAG double row full cylindrical roller bearingsFAG double row full roller cylindrical roller bearings can withstand the radial load and axial load, but also can withstand overturning moment, so they are often used as fixed bearings. The outer ring of the NNC 49V series bearing has a lubricating tank and a number of lubricating holes, which can also be lubricated in the shaft during operation. The NNF50B.2LS.V and NNF50C.2LS.V series of bearings are sealed in both ends, and the seals are filled with grease. With better service conditions, the grease can reach the working life of the bearing. Lubrication can be carried out by lubricating grooves and lubricating holes on the outer ring. If the same number of bearings are mounted on one shaft, the outer ring can vary in speed because the outer ring is narrower than the inner race. The utility model is suitable for a pulley mechanism, so that the pulley can be easily fixed on the outer ring of the bearing, and both ends of the outer ring of the bearing can be provided with an annular groove with an elastic retaining ring.
FAG single row full cylindrical roller bearingsFAG single row full cylindrical roller bearings can bear large radial loads, and can also bear single direction axial load. Axial positioning can be guaranteed by a symmetrical arrangement of similar bearings. NCF, 29V, NCF, 30V series of bearings have two fixed inner ring, the outer ring has a baffle, they can only bear the direction of the outer edge of the fixed axial load. The NJ23VH series bearings can bear the axial load toward the inside of the inner ring, and their rollers are fixed in the outer ring, even if the inner ring is taken away. The two rings are tight fit, easy installation and disassembly.
