What is the use of the lower part of the transformer made of rail?
Transformer parts are equipped with a roller. You can easily pull the transformer into or out of the transformer room. After the transformer is positioned, do not weld the wheels and rails. Another support also received.
Transformer The lower part of the box has two structures: 1 set the wheels. This requires the installation of the track on the basis of the transformer, and then the wheels fixed on the I-beam track, this way to facilitate the maintenance and installation of the transformer handling, but because of the large and larger transformers, the use of wheels is already less; I-beam or channel as a load-bearing beam. This transformer does not need to set the track, on the basis of the transformer relative to the location of the beam weighing embedded flat steel, the transformer in place after the load-bearing beam fixed fixed on the base embedded parts. Need to move the transformer, the chisel spot welding, with the hoist and other machinery will slowly drag the transformer.
This approach facilitates the handling and installation of the transformer, but due to the large and larger transformers, the use of wheels is already less.
Transformer The lower part of the box has two structures:
(1) Set the wheels, which requires the installation of the track on the basis of the transformer, and then the wheels fixed on the I-beam track, this way to facilitate the maintenance and installation of the transformer handling, but because of the large and larger transformers, the use of wheels Has been less;
(2) set I-beam or channel as a load-bearing beam. This transformer does not need to set the track, on the basis of the transformer relative to the location of the beam weighing embedded flat steel, the transformer in place after the load-bearing beam fixed fixed on the base embedded parts. Need to move the transformer, the chisel spot welding, with the hoist and other machinery will slowly drag the transformer.
