When do flat washers use GB95 when using GB97.1?
Flat washers are usually thin pieces of various shapes, used to reduce friction, prevent leakage, isolation, to prevent loose or disperse pressure. Such components are used in many materials and structures to perform similar functions. Due to the limitation of the material and the process of the threaded fastener, the supporting surface of the bolt and the like is not large, so that the surface of the connecting piece is protected by reducing the compressive stress of the bearing surface.
There is no difference in the application. See the tolerance, the high requirements of the use of GB97.1. in order to save money, and the application environment is not high, use GB95
National standard GB95 applies to the performance level to 6.8, product grade C grade of the six head bolts and screws; as well as the performance level to level 6, the product grade is C grade of the nut, the surface of the hardened screwGB97.1 is suitable for six head bolts and screws with grade 8.8/10.9, grade A/B, grade 8/10, grade six, with a grade of A/B, and a self - tightening screw for surface hardening
See tolerance, high requirements with GB97.1. if in order to save money, and the application environment is not high, use GB95.
