When the composite floor assembly can be card into the side slot
Installed almost the same time
Natural assembly, that is, short side without the need for sewing can effectively reduce the waste, but personally think that the premise of composite floor for the general strengthening of the floor, no chamfer; if the imitation of solid wood flooring (surrounded by V-shaped, U-shaped chamfer), personal recommendations To the short side of the seam to install, or light blindly pursue the reduction of waste, the effect of pavement slanting short cup of tea is very ugly. In short, the ordinary composite floor can not be installed on the seam, the smallest waste, imitation wood flooring on the seam to install a small waste is thirty-six type, the middle of the seam to install a relatively large waste, but the pavement effect personally think the best. Oh, if the landlord's room is not shaped room, then the general floor loss of about 3%, no more than 5%, if more than 5%, and the landlord will have a good theory with the construction side, of course, But also with the construction side to communicate, to be aware of, after all, can not put the cart before the horse, blindly only to reduce the waste and ignore the pavement effect. Under normal circumstances, the construction side of the installation master will tell you to install the way, I wish good luck, ^ _ ^
