Who knows about roof fireproofing materials?
Roof water proofing materials: synthetic polymer waterproof rolls, high polymer modified asphalt waterproof coiled material, sheet metal, synthetic polymer waterproof coating, one-component water curing polyurethane waterproof coating, penetration crystalline waterproof coating. Secondly, we have to choose materials that are suitable for roof water proofing. The right waterproof materials have better waterproof performance, TS-3B one-component water curing polyurethane waterproof coating is very suitable and the performance is good. Since traditional roof waterproofing materials have requirements on the moisture content of the formation level which should be less than 9%. It is really important to choose which materials to repair leaking roofs. Kitchens and toilets are moisture, the formation levels of buildings are hard to satisfy requirements, thus, waterproof?layer and formation level are easily get separated and are ineffective in waterproofing.
At present, only phenolic foam boards can meet requirements. The test temperature can be 2,000 degrees, and there is no molten droplet during the tests and it can maintain integrity. heat conductivity coefficient: 0.03W / (mk), non-combustible, non-toxic, smokeless!
Roof thermal insulation materials are various which generally can be divided into two categories, namely inorganic and organic materials: Inorganic materials are expanded perlite, aerated concrete, rock wool, glass wool, etc. Organic materials are styrofoam, polyurethane?foaming?plastic and so on. A. common roof thermal insulation materials 1. the expanding polystyrene board (EPS) has good thermal insulation performance, and cheap price but poor intensity with heat conductivity coefficient of 0.038-0.041. 2. extruded polystyrene board (XPS) has better thermal insulation performance and high intensity but an expensive price with heat conductivity coefficient of 0.028-0.03. It is moisture resistant but needs treatments on surface in construction. 3. rock wool board, with heat conductivity coefficient of 0.041-0.045, is fireproofing, fire?retardant. It has a good hygroscopicity performance but is poor in thermal insulation. 4. gelatine powder polyphenyl granule heat insulating slurry, with heat conductivity coefficient of 0.057- 0.06, has a good flame resistance performance, but the results of recycling and thermal insulation are unsatisfactory. It has high construction requirements. 5. polyurethane foaming material, with heat conductivity coefficient of 0.025-0.028, has good waterproofness and thermal insulation performance, as well as high intensity, but it is expensive. 6. perlite and other slurry, with heat conductivity coefficient of 0.07-0.09, have good flameproofness and water-absorbing ability but are poor in thermal insulation and thermostability.
