Why can't the phone be found in the WiFi network that is set up by the computer? Network attributes can be seen, how should we correct?
First, see if the router version is consistent with the authorities! Then download the official firmware import upgrade, according to the official brand model upgrade guidance file upgrade, usually download firmware, loading and upgrading operations on the router management page! If you have third party firmware, you'll have to upgrade to the uboot, provided you haven't changed the uboot, and first set the fixed IP address that is different from the routing management page! If the router management page is 192.168.1.1, then the 192.168.11 mask is set in the IPv4 protocol to save for the 255.255.255.255! Unplug the WAN port and only keep the Lan cable. Unplug the power line and hold the reset button for 3 seconds. If the indicator flashes, it has entered the brush mode, opened the browser, entered the router, managed the IP, and loaded the firmware after the access to the admin page!
When setting up the relay AP, you need to check that the name is the same, so it's better to have a different name! There is the relay when the channel is consistent, inconsistent, you can not successfully relay, and there is too far away from the route is too far away, and still can not receive
