Home > categories > Home Appliances > Ice Makers > Why does the ice making mechanism stop suddenly during the ice making process?
Question:

Why does the ice making mechanism stop suddenly during the ice making process?

Why does the ice making mechanism stop suddenly during the ice making process?

Answer:

4, the refrigerant charge too much water, can cause the ice blocking.5, dry filter aging failure, loss of proper drying, water absorption function. The 5, especially the 1, the 2, the two most prominent.
3 、 the process tube is unsealed and not repaired in time. This long freeze, coupled with the occasional boot, the moisture in the air will be removed from the pipe into the machine. There are not sealed and long-term placement of the compressor, without drying, it will be used to frost up, but also cause ice jam, dirty block.
It could be system ice jam.The cause of ice jam:1, when the pressure leak test, the water vapor in the air compressed into water, into the pipe, resulting in ice jam.2, the evaporator is damaged, and will start a long-term frozen (reservoir) water molecules in the chamber, and the water vapor in the air molecules together into the compressor (boot when the negative pressure is generated in atmospheric pressure will in humid air water molecules into the machine).

Share to:

Hot Tag