Woodworking engraving machine cutting panels, how seamless stitching?

Answer:

From the starting point, cut to the second 1600 nodes, press the pause, move the material, first make the tool point to the left node, set the origin of the workpiece, and put a clip in the upper left corner, so that the left will not move;

According to the cutting tool diameter, here, take 3.175 of the cutter, it will set the workpiece origin X, axial internal movement 1.6MM, set the workpiece origin, from the new do the next half of the path;

Next, shift the head to the right node and trim the material to make a straight line between the notch on the right and the Z axis. Clamp the right clip and the nose back to the origin of the workpiece. Again, lower the Z axis and make sure the left is not moving;

First, add 2 nodes at the file Y axis 1600, align, and then define the starting point at the new node, make a three-dimensional cutting path, observe the path, the machine starts processing;

Woodworking engraving machines are generally used for marking machines. The surfaces are almost 1200*1200 or 1300*2500. If you want to cut a 2390*1000 material, take 1300*2500's machine for example;