Why is the power of the motor different?1. the same 90T why some motor power 8.5KW, some 11KW, and some 15KW?.2. why are there so many power points? Is it possible to produce the same product with 8.5KW? Is it okay to use 11KW?3. what's the difference between 8.5KW and 11KW? Isn't the power of the bottom more power saving? Or is the power clamping force less than 900KN?4. if the 8.5KW clamping force also has 900KN, then the 11KW clamping force is also 900KN, is that the way it is understood? So 11KW isn't a waste of electricity?Give high marks to adopters!!!
Small screw, injection pressure will be much larger, such as a bar to let you plug in the wood, may be more difficult, if you use a needle in the wood is much easier, the small screw is suitable for precise, thin-walled products, is the need to install the nitrogen injection really do thin-walled products or hydraulic machine. All electric injection molding machine, if you just the production of ordinary products, injection molding machine is basically on the market can meet (limited to hundreds of tons of clamping force of the machine), a large Haitian machine is a good choice
Type two: servo energy saving, energy consumption is not very different, 8.5 of the speed will be slower.Summary: 11KW machine performance is generally better, the speed of each action, for fast cycle, thin wall products.
Type 1: quantitative pump type, 8.5 sure save power, clamping force is the same, because the system pressure is roughly 140-160KG, the speed will be slower, the power is small, determines the displacement of the oil pump smaller.
