Curtain wall stone around the package window 50, cut the size of the window should be smaller around 50?
Here you do not quite understand that the package window 50 refers to the left and right (or up and down) the total of 50, or about 50 (or up and down) a total of 100, I press the left and right (or up and down) a total of 50 to answer you:
Windows need to install the operating space, the top side of the old experts to answer 10, this is feasible, but I think the best points in two,
First, if the package edge stone has been installed, then you let the scene construction team technical staff on the edge of the stone hole after the actual size of the foot back to the measurement, and then take a minimum reduction of 2mm search
Second, if not installed stone edge directly to the hole size by 5-8mm.
Where the content Tingduo, the node if only the window owed in the stone hole is wrong, so that the window can only be fixed with a nail on the stone, likely to cause stone cracking.
Should be selected in the civil hole on the first fixed channel, so that the windows fixed on the channel. Stone and then into the window frame 10mm, at the intersection to play sealant.
If the windows do not have nails fixed directly into the edge of the hole to seal the seal, then no mechanical fixed way to have security risks.
The last one is the outdoor stone directly on the window frame, the outdoor to fight the sealant. Indoor stone directly with the window frame do not fight the plastic, or indoor direct use of materials and window frames sealed.
In fact, your question is very vague, such as you listed the window of the empty size, you know how to cut the
I am at work (now retired for more than ten years) to participate in the completion of the inspection often found such a. Now you find such a problem in advance, my opinion "window frame" around the small 40 is better (frame size unchanged, of course, the natural change in the window, of course, should be the corresponding changes), 10mm left for the mouth, To glue.
??????? This answer you, the window area is reduced, and design, owners, supervision through gas, out of contact with a single. Really can not blame the construction, because the size of the hole on the drawings written clearly. Things have been done, only this solution. But in the future to consider the different decorative materials will bring different effects and found that the drawings have problems, supervision or construction side should be presented at the time of drawing. This is also in advance control. for reference.
The size of the building according to the size of the building map, should have to take into account the thickness of the decorative curtain wall stone, the structure of the hole should be the size of the construction, or stone curtain wall to the window side, top, Taiwan mouth when the head will be formed Stuttering light (window frame surrounded by stone curtain wall).
