a car audio shop they don't make wire harness for 1996 totoya avalon
It relies upon the position it really is cut back, and what percentage wires are cut back. Wires could be spliced, yet you're able to make confident the coloration and streak coloration are matched on both wires earlier splicing. the in simple terms suitable splice is to apply a barrel connector that allowes the wires to be inserted in opposit instructions from one yet another and contact one yet another. Crimp tight with an excellent crimper, and solder the joint. Use warmth cut back tubing to reinsulate the wire. the nice and cozy temperature cut back tubing could be placed on the wire earlier splicing, and could not be heated at the same time as soldering the joint.
that is correct the Avalon uses a 15 pin plug that nobody makes this what you have to do get the regular toyota plugs 10 pin plug and 6 pin plug wire them with long cables at least 8 feet this is going to plug to the Toyota factory amplifier that in the right side of the glove compartment the other end plugs in to the new radio good luck
