I want to know why they have so many and are they really necessary. is there a list that says what they are AND their purpose of each one?
the oil will have destroyed all rubbers in the brake system! Dont just flush out system because the wheel cyl,master cyl, and anny weight compensating valves will leak ,if not now they will in the next few days.You will have to get rid of the oil by flushing with methylated spirits,drain as much as possible by undoing all bleeders,re tighten and fill with metho,then drain that out.Do this several times and blow out with compressed air.Then all wheel cylinder rubbers will have to be replaced,also master cylinder rubbersand anything else that has rubber in it.good luck
Flush every line with cheap brake fluid extensivley and see if that helps. Shouldn't be 3 large even if you had to change calipers, master cylinder and wheel cylinders. I'd get a second opinion on this. I don't think this will screw up a abs module (could be wrong). Good luck.
what the shop said you pretty much need to strip and/or replace the entire brake system. Its a big job. Oh and for the love of god do not just flush the brake lines and refill with brake fluid. the power steering fluid will have most likely ruined all the seals in your brake system. even if it does fix it now, you'll regret it when the seals give way and you're screaming down the freeway with no brakes.
check on a cigerrete sight like type in what additives are in tobbaco and you might get an answer
