Ok so every night around this time I get a horrible urge to urinate, it lasts until the tank is empty I'd you know what i mean and that takes a LONG time since only a little comes out at a time, I have to goto the bathroom about 15 times before I start urinating (can't hold it) on the rug, it is disgusting and it's really been bad for over a month now, the funny thing is when I lay down the urge is so bad it feels like the urine is about to just come out, rather when im sitting up it's not bad. Also once I fall asleep I don't wake back up in the middle of the night to urinate that's it until the noting. I also noticed I have a very hard time urinating during the day I have to get it an extra push, something i never had to do before in my 20 years of life, I'm very young for this kind of stuff, I don't know what it is and I have been to the urologist he said there was nothing wrong, im getting worried. I appreciate all of the help, thanks very much.
It would depend on many things such as how big is the facility, how many rooms need to be covered and to what degree, how many break glasses and sensors, is it monitored by a central station and not least local/state codes. It would need a survey.
Overall, they only seem like average snapshots, not anything satisfactory or exciting, sorry to mention. I could additionally recommend to show off the flash, or a minimum of diffuse it with a realistic espresso filter out. Other than that, brush up on images, similar to composition, rule of thirds, and lights. Practice makes excellent; so does finding out and studying. Keep making an attempt, and count on higher outcome with time.
You can buy 1/2 PVC pipe and appropriate fittings to make a base of the desired size (the one I built was about 8' across and about 7' tall). I started by buiding a base from a piece of 1 x 12 lumber 8' long (for the base). I screwed a one gallon bucket to each end of this board. Next, I took a section of the PVC pipe with a tee on one end (to anchor the pipe in the plaster) and poured plaster of paris 1/2 way in each bucket (the pipe was laid in at an angle facing the opposite side-with the pipe touching the bottom outside edge of the bucket and the top of the pipe about an inch away from the top inside edge of the bucket). I allowed the plaster to set up, then I cut the exposed pipe to about 4 above the top of the bucket and glued a sleeve on the end of the pipe. Next, I took and assembled two pieces of pipe (I don't remember the actual dimension) to form the arch to the desired height (I just shoved the ends of the pipe into the open ends of the exposed sleeves - no glue). To transport, remove the arch (with balloons tied on) and carry as a separate piece with the base. It is much better if you tie the balloons on after you set up the arch. We have used it for years and it is easy for people to bring back to the store when they have finished with it.
