How can artificial grass be constructed?
Position: first of all, according to the design drawings, the grass moved to the sideline of the site, in which the white marking of the turf, respectively in the middle line and the bottom line of functional line, and other turf spread out in turn;
Approach: in the entry before the construction of the ground roughness, slope and surface appearance were detected at flatness, before entering the construction; on line: to find the center point of the site and the two half circle, and according to the three point field line and sideline intersection, and then to the Pythagorean theorem set the venue on the function point, line position;
Cut line: cut the white grass outside the centerline and the bottom white line, and cut them separately into the width required for the site marking. Put aside while inactive;
Function: in the basic line of turf after the splicing, pull out the line again, point to accurate paper knife cut, cut the grass out, will be connected with in scraping glue, originally prepared white line back into the grass, after cementation, to connect closely bonded part;Finishing: when the sod is finished, the folded part of the lawn needs to be opened with a paper knife, straightened, docked, cut off the overlap, and then cemented and compacted;Note: all the turf after sand processing, start pumping sand, according to 4m * 4m specifications on the whole point, according to the different grass (kg / m2) sand injection number, the quartz sand evenly spreading to the specified area, with brushing machine will be uniformly spread and quartz sand grass line comb, and a comb each aspect;Note: according to 4m * 4m particles size on the whole point, according to the different height of grass per square metre kilograms will note particles of uniform particles spreading to the specified area, with brush grass particles dispersed homogeneously and the machine will comb the grass line, and a vertical comb;Carding: fill all finished, and then brush grass machine vertical and horizontal carding, grass fiber each time.
Mosaic: green turf each joint lap 20-30mm, with special cutting knife from the grass push joint, so that both sides of the turf as far as possible lap compact, then the paper cutter cut cut, along with the middle joint turf connecting belt, into the grass below, the turf joint is located in connection with the middle then, the glue evenly coated with rubber scraper scraping on the connecting belt, and then put on both sides of the turf and the interface bonding; parts with heavy compaction;
