How do you make a 45-degree car knife
Set the knife and hold your hands together. The tool is worn in the direction of the top down, not too strong, and it is done by grinding wheels. The Angle of the Angle is determined by the Angle of the car. Open slot, grinding wheel trim. When the slot is open, gently push up to see if the seal is appropriate, but slowly pull up from the top and make sure the groove is a straight line. As for the width, make sure that you know how to make it in the slot. Don't get cold while hot. The usual slot is wide and the iron filings are good.
POSS is good. The knife is good. The cutting tool is worn by the top and bottom, not too strong, and it is done by grinding wheels. 3, make a few corners to grind out, Angle oneself grasp, by your piece of the piece of the car of the rough car of a car. Slot, wheel trim. When the slot is open, gently push up to see if the seal is appropriate, but slowly pull up from the top and make sure the groove is a straight line. As for the width, you can handle it yourself, and see how to make it in the slot. Avoid cold water in high temperatures 6, don't teach the teacher. 7, the usual slot is wide and the iron filings are good.
The first thing you need to do is pick up the wheel and hold it steady. Then he groped himself slowly, not in the church, but after he had done his own work. It's like swimming. What other people say on shore, they have to get their own water to know.
