Home > categories > Machinery & Equipment > Hoists > How is the cable end of the electric block fixed
Question:

How is the cable end of the electric block fixed

How is the cable end of the electric block fixed

Answer:

I have my own pictures, but I can't upload my phone. There should be no less than three steel rope buckles on the drum. Unless there is a problem in the quality of the supplier's supply, look up and see if there are any other buttons. If there is a catch, there is no manufacturer
The general electric gourd has two fixed points, one in the reel and one in the roll case
Fixed place a rope around the fixed port, the steel rope wear in steel rope back after the steel rope tied for locking in the steel rope fixed end into the iron triangle deed. Rope device on the steel rope is a rope hole, wear the rope into the steel rope hole steel rope buckle lock after electric hoist around a circle around the circle evenly distributed several fixed clasp, the steel rope tightening in the fastener. Be careful not to make the string short, otherwise it will not be able to touch the limit switch due to the failure of the guide line to cause the steel rope to cause the danger. Always adjust the limit switch when the rope is finished. Crane machine is special machine, need professional personnel maintenance, oneself make a little bit not in place to be able to bury the security hidden danger, suggest you ask professional maintenance personnel

Share to: