How to clean the plastic tube of water dispenser for water dispenser?
Tools: 1, bottles with soft rubber stopper (60MM is the most suitable) 2, a fine plastic pipe work: 1, the fine plastic tube on the fire, slightly heated, folded into the required angle (about 50 degrees angle). 2. A hole smaller than the plastic pipe is opened on the rubber stopper. 3 、 plastic pipe plug. 4, bottle filled with water. 5. A stopper made from a stopper. (see picture) 6, upside down into the hamster cage. 7, OK! 8. Take my advice and give me the grade!
Electric water heater is usually automatic water supply, there is one-way valve control backwater. So, generally do not care about water problems, as long as the electric heating on the line, put out is hot water. If the water is not available, it is likely that the water pipe is not water or blocked, and to open the hose in the Sheung Shui place to connect to see if there is a normal outflow of water. If everything here is normal, the water heater is not into the water, and then see if the water is blocked, but also to remove the water from the hose connection. General water heater will not be a problem, the problem is in the valve!
The automatic cleaning function is that the water dispenser is provided with an automatic cleaning nozzle, and when the cleaning is needed, the water discharging motor starts, and the cleaning part is cleaned by the jet stream.
