How to improve the vibration of alloy milling cutters?
Alloy knife cutter vibration, speed is generally too high, cutting depth is too small, thin wall workpiece, tool chuck long lack of rigidity.
The knife lever is thickened or the snack knife is reduced
Tool vibration is caused by a variety of reasons:Reduce the 1. cutting amount caused by over - cutting depth and cutting width, cutting depth, i.e.;2. the tool is dull, or the rake angle of the tool is too small - regrinding or increasing the rake angle of the tool;3. the overhang is too long - to shorten the length of the tool overhang in the grip of the tool holder;4. lack of tool rigidity increase tool and blade rigidity and improve through tool design;There are a lot of similar reasons, the key is to find the problem, and then improve. I hope I can help
