How to upgrade the 6+9 satellite TV receiver is very small?
The dual mode machine does not need to be upgraded. It has automatic upgrade function.
Upgrade steps1., in the TV receiver set-top box signal status, off the set-top box power supply, down the antenna connected to the signal line.2. turn on the set-top box power.3 according to the remote control menu (TV show "main menu").4. select "system settings" and press "confirm" (TV shows ask for password).5. enter the password "9999", press "confirm"".6. select "restore factory settings" and press "confirm"".7. connect the signal line of the antenna (the intensity and quality of the TV display signal are all green).8., select "manual search" temporarily not confirmed. (the first line in the upper right of the TV shows < 1 >)9. press the volume key > > to make the first line on the top right of the TV show < 1 > > < < 2 >".10. press "confirm" to search 16 sets of programs.11. yellow message block disappears, select "automatic search", press confirm. There should be a TV programme later.12. quit normal viewing.
Press the menu button, pop-up menu in the TV screen, the keys to the button of the remote control system according to the program, press the confirm button, the pop-up dialog box requires a password, enter the password 0000, in accordance with the confirmation button pop-up menu will automatically search the cable by remote control keys to the automatic search program. However, the best advice by manual search, because the automatic search can sometimes not search program, manual search search 11892 (H) 8800,6 programs, 12100 (V) 28800,20 (V) 12140 sets of programs, 288000 programs, a total of 46 sets of programs.The other one is press the menu button, pop-up menu in the TV screen, the keys to the button of the remote control system according to the program, press the confirm button, the pop-up dialog box requires a password, enter the password 9999, in accordance with the confirmation button pop-up menu, press program button of the remote control keys to restore the factory settings, press the confirm button receiver will restore factory settings, and then move the cursor to automatically search the sub menu, press the confirm button will automatically search out the program, after the program search, some of the programs and the programs menu does not need to manually modify the synchronization, synchronization to.The manual modification steps by remote control program, the TV screen pop-up program list, and then move the cursor to the need to modify the program, edit the PID menu, according to Huang Jian TV screen pop-up sub remote controller, will find the video PID and audio PID were modified, in press confirm key program the synchronization, press the green button to switch the satellite switching satellite, remove excess program, press the red button, button to save the data OK.
