Fire extinguishers are great at putting out fires.But would it be possible to actually MAKE a fire using an extinguisher. I suspect that there might actually be a few different ways of doing it. If you have any ideas (based on sound scientific principles) please let me know so that I can perfrom an experiment and see if it works.
try vacuuming it, dust can cause them to chirp
No answer. All I can say is it s junk! Mine kept going off until my nerves were shot and no way to shut it off. We ve had it for only 6 months. The 10 years life span is a joke.
HA HA! Connecting rods do not change anything but how far away from the crank the piston is (and rod ratio, but this is a desighn consideration, not ay dynamic change). I've never messed with a 327 but i will wager that the rods are probably identical to a 350, or longer. Lots of better parts than Edlebrock out there as well. Do some home work. Make sure you have a forged rotating assembly (you will have to spin the motor beond the abilities of cast parts), get some good heads, and a medium-high duration cam. Flat top pistons should do fine.
Sounds (manufacturer) (distributor) .Hope this helps you out, .( My own Personal Experience and Suffering :) I know what You're going through, hope you find the solution from what I have mentioned above. .
