The host signal does not turn on when there is no sound. Sometimes you just pull it out and plug in the microphone and there's a signal. Do not plug the microphone, which wireless transmitter against the host, there is no signal, it seems to have directional. Jiqiu!!!! Know the prawns please help answer! Thank you
You should be the transmitter is broken, you contact the nearby agents or directly back to the factory maintenance, 0750-7110066, call can also, the machine is a good machine, I was in the factory, not the manufacturers of the products are 100% flaws are not, please call the factory and consulting. My name is Zheng.
It looks like the hardware is out of order. Originally looked other school to use, separated very far far very effective. The quality of your microphone is not good, you can go to the store to try it.
The first rule your radio transmitter does not issue you the key to the problem in the receiver above you put the megaphone open in the host receiving circuit with a receiving crystal is generally small rectangular white metal appearance, you put down the receiving circuit board good welding position is not cracked generally because the welding crack will cause such a problem to you the two pin crystal welding can be ruled out the other fault detection does not require welding wasn't only a few screws then you observe the crystal two corners and the circuit board, I hope to help you!
