Sorry for my english. What is the function of Catalyst on Poly Casting Resin ??? Does every one knows if the resin once is dryed is heat resistent??
for the short term, it will be ok as long as the other 3 are tight.
If you can find a bulb of that wattage, chances are the wiring system is going to handle it with no problem. I don't know how much reserve your electrical system has though. The problem with charging systems is that at idle of low engine speeds, the alternator doesn't make enough current to meet the needs of the electrical system. The battery then discharges current into the system to meet the needs. On little bikes, midrange engine speeds usually meet the electrical needs but not much more. At high engine speeds, the alternator produces more current than needed, which isthen controlled by the regulator. I imagine your bike can meet the extra load unless you do a lot of idling or putt-putting around. However, I wouldn't try to go with the more normal 55/60 watt bulb found on bigger bikes. A 45 watt bulb isn't going to burn the reflective material off the shell. I run a 100 watt bulb on my bike with no problems.
