Home > categories > Consumer Electronics > Monitors > Samsung LCD digital analog conversion, several times after the black screen
Question:

Samsung LCD digital analog conversion, several times after the black screen

Every day when the first boot, the screen is full of flowers, and this time there are 2 cases, one is to start successfully, windows login successful, the screen will not spend. Another is the windows loaded, the screen will automatically switch the number, analog, conversion after a few times on the black screen, power light flashing. Can only restart until successful.Successful login can be normal use, but occasionally with the use of suddenly flower screen, especially when playing games, the probability of a large screen. (after the screen does not stop running procedures, there is still sound) card, I changed a lot of version of the drive, the system has been reloaded, but the problem remains. I want to ask, is this the monitor is broken or the graphics card is out of order?

Answer:

GPU graphics core.It's not a monitor problemJust change the video card
See if the capacitor on the graphics card is exploding. The capacitor is out of order. It doesn't work properly when it is started. After the restart, it is full of power. The capacitor can work.
This is the monitor fault. And most of them happen on t190 or similar models. It usually takes about a year to start this problem. It is usually caused by touch plate damage. If this model can only replace the touchpad to eradicate the fault, from your description, the power supply will also be inadequate. Samsung is a common thief.
Samsung display black screen, it is recommended:1. check the signal line at both ends of the connection, observe the picture after fastening.2. switch the signal source on the monitor body [Source] key or [toggle / confirm] key.3. change other computer tests and troubleshoot computer problems.4., if the SA series display, please log on Samsung's official website, download the update program and then try.

Share to: