The fire service wear and fire water rejection method
It's simple to wear, as long as it's fast, usually with pants, tops, helmets and belts, and carry on equipment.Hose specifications are many, usually 20M, it is not clear whether the current specifications change, but the current use of fire is calculated by the 20M. The common water has a hose with a diameter of 65MM and 80MM. The 65MM hose is the branch hose and the 80MM hose is the main hose. Water rejection method is very simple, first of all to see is how to close up the hose, the majority (for example the fire brigade) is a hose folded rolled up, as long as the hands thumb, stuck hose buckle back, will be picked up to the front to throw off the hose can be, at this time, his hands holding a belt buckle, can be connected to other water, water separator or fire hydrants and other fixed facilities. If the winding method is not folded in half, but in a single winding, you can use the towing method to lay the hose, so that is not the hose.
Fire hose specifications are generally 25 meters, diameter 65 mm, when the first water hose left half, let the two fire hydrant joint together, put the hose rolled up (the best practice), will be thrown when wrapped hose outward push out, holding one end of the joint fire hydrant go forward, this hose winding is not easy. (this is technical work and requires a lot of training.)
The fire suit is first put on the ground, two legs in, and then pull up the fire protection clothes, so you can put on.
