I would like to ask you the following questions: Recently, the newly purchased three Lin electric water heater, installed in the upper layer of the five bathrooms, a faucet, that is left to wring out hot water, to the right to wring out cold water, mixed type.1 when there is no safety valve, the hot and cold flow is normal, but the check valve is dripping.2 manufacturers said that the high level to safety relief valve, dripping water and this also concerned, it took more than 100 safety valve, on the cold water pipe, but since then, hot water flow and its small, cold water normal, the check valve is still dripping.3 excuse me, check valve, check valve, safety valve is not a thing? Is it just a different name?4 is the relief valve the same as the relief valve?Now it's really a tough one. How do you solve the problem of small drop of water and hot water flow? The manufacturer said the pressure, but I very cold water washed!Thanks for the answer!
Well, it's useless to have all the valves removed. The original valve has all functions of the machine. Drip valve is normal, because your tank is a closed container, heated from cold water to hot water, the pressure inside its tank will increase a lot. Therefore, the pressure must be released, the valve is equivalent to burning rice cooker lid, rice porridge opened, the pot can top the overflow. The reason for the safety valve is the same. All the hoses should be removed.In a word: you are fooled, as long as a valve is enough. You don't need so much clutter. A safety valve is the one with a small mouth, and that mouth should be hose drain.The air heater is now used. The waste of electricity is out of date.
Check valve and check valve is to prevent backflow of water, the valve is used for pressure relief, when the water heater pressure is too high, the pressure through the pressure relief valve and pressure relief valve on the other: for water, the quality is not good, the main problems for the water pressure is too low to cause, and check valve and pressure relief valve will further reduce the pressure, you can try to check off a try, I think the check valve is useless. If not, just add a booster pump to the cold water inlet.
You called the check valve is also called one-way valve, safety valve has non-return function, also known as relief valve, also can be said as a pressure reducing valve. About 7 kilograms of pressure will generally not Water Leakage, Water Leakage, because of the small water valve and is a function of the filter, open the inlet connecting, you will find a safety valve on the water inlet filter gasket, cleaning.There's no more than 100 in that thing. We're all dead. Send you one.You said that Sanlin manufacturers on this level? Too oftenThe safety valve must be fitted, or the tank will be under great pressure and the hot water will run into cold water.Relief valve function: release, check, filter
