What about carpet foaming?
A washing machine with a rotating type and a grinding brush is adopted. First, the cleaning agent is transferred into the tank according to the method specified by the manufacturer. When the detergent flows out of the carpet, the cleaner rotates on the carpet at the same time. In the foaming at the same time, the dirt scraping out, surfaced in the foam, cleaning, pay attention to the flow of lotion should be suitable size, pollution in the middle of the place for two cleaning. Start the vacuum suction machine, foam carpet and lotion with dirt suction, suction, vacuum degree is good, but be careful not to pull out the damage of pile. Rinse with clean water or warm water and then pump it 2-3 times. After rinsing, the vacuum cleaner should be immediately used bamboo brush or brush, will be in accordance with the direction of the pile lodging wash before straightening out. When all is done, natural drying or drying shall be done, and the trampling shall be avoided as much as possible. Finishing with a brush or a vacuum machine with a brush, removing bits of wool and dust.
Powder cleaning: Sprinkle the powder onto the carpet, then brush it and then vacuum it. This method is not cleaned by water. After cleaning, you can walk on the carpet, but the cleaning power is poor.Spray cleaning: spray the lotion onto the carpet, wipe with foam pad and absorb the stain. This method uses less water and can be washed within a short period of time. But not very suitable for woolen carpets.Warm water stains: use spray and vacuum cleaners to spray warm water onto the carpet, then vacuum it immediately. This operation is simple, do not hurt the pile.
