Ok so im getting my contact lenses soon and i was wondering what are the things that i should stay away from ; safety rules ?
First off you can try removing the U-trap under the sink, and see if the clog is there. You will need a good pipe wrench or Channel Lock pliers to break the nuts loose. When you get it off, you will most likely have to replace the seals, as they are most likely old and dry now, Those are cheap, and most hardware stores carry them. Just take the old ones, down and they will show you were the new ones are located. However, before you do all that work, I suggest you buy a toilet plunger or the sink plunger, also available at any hard ware store, and even in some Drug Stores and are also inexpensive. Fill up the sink, about half way, and use the power of the plunger, a few times, and hopefully, you will dislodge what is plugging up the sink. It may take a few tries, but with what you have done already, it should do the trick for you.
Those heads use pedestal mounted rockers. The old style stud mounted rockers wont work. They do make aftermarkets and a stud mounted conversion but if you aren't into performance just find a set ('77 and up 302/ 5.0 will work). Good luck.
they arn't called labrets they are called studs also lebrets are the peircing in the middle of your mouth and also it would be better to get studs imo they look better
I tried healing with a hoop when I got one of my piercings, and a stud for the other. I prefered the hoop WAY more, so much easier to clean and maintain, plus it doesn't look as silly as a labret does when the swelling goes down. I advise starting with hoops, because they also look great n__n you can always swith later on down the road.
