I watched a video on wonderhowto and I dont know what and where do blind wand aluminum wand used for. Here is the link of the video:
I always use the blue pipe cement. It will set under water. Be sure and cut the pipes square and push it all the way in to the fitting after giving both the pipe and the fitting a coat of cement. I generally wipe the pipe with fine sandpaper first and I have had very few problems with leaks. Twist the pipe 1/4 turn or so when putting it together and hold it in place for 10 seconds like the instructions say. Use plenty of cement, it doesn't cost much and it flows thin so it wont clog anything. Good luck
I'd say go back to were you had the alarm installed, let the mechanic or whom ever that did it see what the problem is. Also, what type of alarm is it ? Is it the type of alarm that has remote start, 2 way pager alarm ? If so, by pressing wrong buttons can confuse the brain on the alarm system. I'd still say go back and see what went wrong. They should show you or fix what they messed up on for free. Hope I helped !
