What does the water heater show "E1 error" mean?
Observe whether the combined electrode has discharge from the window. At this time, the discharge distance of the combined electrodes can be checked, and the connecting device and the pulse generator are detected.
Display E1, indicating that the machine has some kind of fault (generally speaking, the machine failed ignition), the water heater shows that the E1 indicates that the ignition failed or stopped in the middle1, because the flame detection (feedback electrode) induced current is weak, it is determined that the burner has no fire, causing the program to interrupt. At this point, check whether the feedback electrode is in the flame's high temperature zone, adjust the feedback electrode height, check the feedback electrode, connect the line and connect the plug;
Under normal circumstances, E1 means that the water heater failed to ignite successfully, that is to say, it doesn't catch fire?There are a lot of reasons, the gas water heater can not fire water, gas, electricity of any of the component damage will cause the water heater to beat the fire. But now the quality of the water heater components are generally improved, not so easily broken, actually causes a fire many times because of water scale fouling caused by water the hot water pipe caused by blockage, cause water flow back pressure is larger, to a certain extent, water heater water gas linkage device will think is the hot water faucet has been closed and shut off the gas channel, no gas, certainly not on fire.
3, the ignition pulse spark is not normal ignition, this situation is generally a gas channel failure, no gas to the combustion chamber, resulting in no ignitionBecause each brand of all types of fault code, manufacturers settings are different
