I need to change a cable that goes from public power lines to power meter because its skin/protecting shield is peeling off. What happens is that I need to fix this issue as soon as possible but do not know what kind of cable should be used for repair. I would greatly appreciate your help. Thank you!
examine the entire load modern-day score of the motor then length your cable for a voltage drop interior the wires of decrease than 5%. With that long of a run the voltage drop attention would be greater stringent than the optimal modern-day for the cord gauge.
What did the electrician say? This is not exactly a DIY project, because it requires inspection and possibly permits. You cannot connect this yourself. The size if the wire is related to the material, distance, and power. It may also be related to local practices. The old 60 amp service entrance is illegal, so you may have to upgrade to 200 amp which would be way different for wire size. An electrician will know the codes relevant to your situation. You can probably get the wire at a home improvement or electrical supply house but the electrician will have to make the connections. Plus, it keeps you from frying yourself or the electric company from pulling the plug.
