What's the size of the kitchen cabinet door?
Install the door of the cupboard, with hinges roughly straight, straight, half curved and full. The door on a large two hole is composed of a hinge hole punch special one-time play out, the two hole is used to install the cabinet hinge, in two holes in advance into a small nylon plug up. Two small hinge fixing holes on the fan plate of the cabinet body are drilled out with a row of drill and three in one connecting pieces, the holes, the plate rows, the upper and the lower hinge holes, and the small nylon plug must be embedded in advance.
The door size of the cabinet door should be deducted 3 millimeters in the normal size, and the cabinet door can be opened normally. The width of the door of the normal cabinet door is generally 400-500mm, height is: the total height minus the foot, minus the table, and then to reduce the distance between the table and the door (do not let the door panels collide with the table). We are two blocks to the cabinet door to door for example, then the width of the cabinet door is an upper plate divided by two minus three or four mm, such as cabinet divided by 2 of the width of the 900mm is equal to 450mm minus 3 mm is equal to 447mm, this is the width of a door.
First of all, to indicate the center of the common station board of the cabinet, measure the center to the outer edge of the left and right plate. A door will be reduced by 2 millimeters. Two doors, the total length divided by 2, minus 2 mm.
Measure the total length of the cabinet. If a door is made, the door size = total length should be reduced by 2 millimeters. If it is the two door, the total length divided by 2 will be reduced by 2 millimeters.
