What should be paid attention to when installing heat pump?
Installation location should be away from strong electricity, strong magnetic field direct action areaUnits must be equipped with shock absorbers to prevent vibrations from passing through buildings? as far as possible not to install the unit in the sun and rain environment, otherwise you need to install sheltersUnit when the factory has been equipped with water flow switch, the user does not need to be installedUnit and hot water outlet pipe, circulating water pipe and tap water inlet pipe are flexibly connected, so that vibration can be transmitted from the unit to the water pipe? the main water inlet and the circulating heating inlet must be equipped with a Y filter to prevent impurities from damaging the equipment
Say "three points product", "seven points" installation." Not unreasonable. Especially for the air source heat pump water heater with water bearing system, the performance is more outstanding. From the beginning of the installation of topographic analysis, to local climate, and then to the water pipe, etc., have to take full account of. Any relaxation of the link may lead to the safe operation of the whole system.? select a horizontal position that can support the weight of the heat pump water heater without increasing noise and vibration.? select an air inlet and outlet, with no shelters and unsealed locations. The minimum distance between the three sides of the air inlet of a heat pump water heater and the wall (Fig. 1).The installation location should be convenient for debugging and maintenance, and the space for maintenance is reserved.
A Y type filter must be installed at the inlet of the main water inlet and the inlet of the circulating heating water to prevent the impurities from damaging the equipment? the rigid pipe of the main engine shall be equipped with a spring shock absorber to prevent the pipe from passing the vibration to the buildingInstall hydraulic pressure gauge and thermometer for maintenance and repairUnit installation of dew drain drain pipe: align drain pipe into the drain pipe below the heat pump water heater chassis and then introduce it to the drain pipe.Must do a good job of pipe insulation, to prevent energy lossesThere should be enough space left on the side of the unit.To install more direct heating water heaters, such as the distance between the units, such as
