Why do satellite TV receivers show no satellite?
Upstairs said is right, you first determine the lid position accurately aligned to the satellite, then you restore the factory (system settings restore default settings, password 0000), then shut down, and then boot automatically, then you can watch the.
1 check if the feeder is not connected (signal strength in the menu when the feeder is connected).2 check whether the TV input is connected to the AV, and the connection is good, see the receiver menu on the TV3: adjust the receiver menu, look at the signal quality bar (allows others to watch phone contact). Antenna toward the Southwest (star 9), slowly (bit by bit) to rotate the antenna, first about the maximum, and then up and down until the signal quality can be the largest. For when the weather is fine. Weather exclusion.4, if not yet, to the aftermarket upgrade, and re search, and then adjusted to the third home.
