Will the power of the LED bulb grow longer and longer? Why?
Voltage problems, as well as unstable factors.Long time no change, should
Could you tell me the measurement method? - how about the side current and voltage? Or, whether direct measurement of active power under mains power supply?Also, can you tell me the circuit of LED bulb? DC power supply or AC power supply? Constant current module drive or RC current limiter? If the power supply is 12 volts low, is the resistor only current limiting?I feel something doesn't make sense......In one case, the longer the duration of the LED bulb, the greater the power:In some advanced LED bulb bulbs, an anti impact "slow start" circuit is added to the design, and a NTC (negative temperature coefficient) resistor is incorporated into the LED power supply circuit.Because of the larger resistance of NTC in cold state, the current of LED is smaller and the power is relatively small;With the use of electricity LED bulbs, NTC resistance temperature gradually increased, the resistance is reduced, the current of LED is also increased, so the power LED bulb also increases, temperature stability, until NTC resistance unchanged so far.
In general, LED energy-saving lamps (including LED bulb bulbs) use a constant current drive that does not change the magnitude of the current with time or temperature, so it does not become more powerful as it grows for longer periods of time.On the other hand, if because of long time use leads to LED lamp temperature rise, according to the electrical properties of semiconductor, the PN junction voltage will also decreases with increasing temperature. Then, when the current is constant, a drop in the voltage drop means a decrease in power consumption, although the reduction is very small.
The LED bulb does not become more powerful for extended periods of time.
The LED bulb does not become more powerful for extended periods of time.As LED chip light emitting device of the PN junction has a negative temperature characteristic: with the increase of temperature, the conducting voltage drop caused current rise, therefore, when the LED bulb is lighted with the temperature rise of power consumption will be increased. But good circuit and parameter design can reduce the influence of this temperature.
