2.5 square copper (green, with the threading tube) can withstand the highest power of several kilowatts,
See your TV has a few tones, the video input terminal is now the general TV has AV two groups, S group, color input 1 - two sets of terminals you can connect the DVD to AV1 satellite receiver AV2 on the general satellite receiver No S color difference output can be received on the AV can be DVD generally have S color difference input terminal connected after the remote control by pressing the "video" key switch can be very convenient AV --- audio and video abbreviation unless your TV There are two sets of video interfaces
Absolutely can be twisted pair market to buy some of the line to do monitoring
In this way, buy three tones, video 1 minute 2 plug (pictured), these three plugs are inserted into the TV behind the corresponding tone, video input (that is, after the TV yellow, red, white three-color) , Then, the satellite receiver audio and video cable into the TV behind the interface out of the way, the DVD player's audio and video cable into the TV behind the other way out. It is done. In this way, only the home of the TV all the way to the video signal, you can achieve the satellite and DVD switching, and attention can not be both at the same time open, otherwise interference. Oh, your TV has all the way to the standard video input (the third row) [connection one] in accordance with the above my method, the line and head to the third row. (That is, the third row of red and white interface) and the above mentioned the same, the video part: buy an S-terminal line, this piece of the line (recommended) to buy two pictures of the plug, the audio part (that is, the third row of red and white interface) Line to the DVD player and TV S terminal of the corresponding location (premise: tune the DVD machine's output mode for the S-VIDEO), the satellite machine's yellow line connected to the third row of television yellow interface can be. According to this method to do the quality will be better. I wish you success!
