Can Tengda F6 repeaters be controlled by mobile phones?
In general, both ends of the repeater are connected to the same media, but some repeaters can also do the switching of different media. In theory, the use of repeaters is unlimited, and the network can therefore be indefinitely extended. In fact, this is impossible, because the network standards are specific to the delay range of the signal, the repeater can only work effectively within this set of regulations, otherwise it will cause network failure.
Repeater (RP) is a device that connects network lines and is often used for two-way forwarding of physical signals between two network nodes. The repeater mainly completes the physical layer function, is responsible for transmitting the information by the bit in the physical layer of the two nodes, completes the signal duplication, the adjustment and the enlargement function, thus lengthens the network length. As a result of loss, the signal power transmitted on the line will be gradually attenuated, attenuation to a certain extent will cause signal distortion, and this will lead to a reception error. Repeaters are designed to solve this problem. It completes the connection of the physical circuit, amplifies the attenuated signal and remains the same as the original data.
The repeater is the most simple and inexpensive networking equipment under the LAN environment to extend the network distance, the operation of OSI in physical layer, the repeater has a regenerative amplifier function for the signal on the line, to extend the LAN segment length (only for connecting the same LAN segment).
A repeater (RP) is a connection device that works on a physical layer. Applicable to the same two types of network interconnection, the main function is to transmit or forward data signals to expand the distance of network transmission. A repeater is a network device for regenerating and restoring signals: a physical layer device for the OSI model.
